BaoFeng - VHF/UHF UV-82 HT Duobander PTT Radio (для страйкбола)

Размеры: uniwersalny

BaoFeng UV-82C Dual Band (VHF/UHF) Analog Portable Two-Way Radio

HT version with better modulation and white noise reduction.

The UV-82 Series come with a dual push-to-talk button. The dual PTT is a huge leap forward in the HT technology. It allows you to transmit on two frequencies by the use of the rocker PTT switch. By pressing up you can transmit on \"Frequency A\" and by pushing down you can transmit on \"Frequency B\". Frequency A or B can also be used as a scanner of channels, frequencies, CTCSS and DTS tones.

The UV-82 series has upped the bar on affordable ham radio technology! Compared to previous BaoFeng products (UV-5R, GT-3, and the v2+ Series) the UV-82 comes with a much louder speaker (1 watt), a much more solid case with larger buttons, and a new chipset and PCB board that outperforms the range, accuracy, and output of the previous BaoFeng chipsets. It is not simply a remake but a new radio from the ground up. It outperforms the the 2nd Gen UV-5R chipset (used in the UV-5Rs, GT-3 BF-F8+, and v2+ series).

The UV-82C is certified for use on commercial and amateur frequencies. The UV-82C is FCC Certified for Part 90 usage and is able to Transmit on Narrowband (12.5kHz) and Wideband (25kHz).

The UV-82C has one built-in receiver but can \"watch\" two channels (semi duplex). Monitor two different frequencies (even on different bands (VHF/UHF)) and the radio will monitor both frequencies giving priority to the first station to receive an incoming call.

You can listen to the FM Broadcast radio, while still monitoring your radio frequencies in the background. Any incoming call will be given priority insuring you never miss an important call while listening to the radio.

The UV-82C supports the most common Analog Tones. It supports CTCSS, DCS, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the UV-82C supports the latest standards

The UV-82C can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones

The UV-82C has an internal VOX (Voice Operated Transmit) function for convenient hands-free operation and can be used in conjunction with the included earpiece and mic. The VOX level and VOX delay time are adjustable your needs.

You can program your UV-82C exactly how you want it. There are 128 programmable memory channels. You can add or remove channels from scanning list using the free computer software. You can give channels alphanumeric names, using a computer. The radio has 2 power levels (5 watt maximum), allowing you to choose how far you can communicate. You can set VFO limits using the CHIRP software. You can easily program from a PC to set-up the radio to operate exactly as needed.

Features:
- Single or Dual PTT Selectable Switch
- VFO (Frequency) and Menu Lockout
- 25KHz/12.5KHz Switchable (Wide/Narrow Band)
- FM Radio (65.0MHz-108.0MHz)
- Large Tri-color LCD Display (3 Selectable Colors)
- LED Flashlight
- High / Low RF Power Switchable
- VOX
- 50 CTCSS/ 104 DCS Tones
- Tone searching/scanning
- Dual standby
- PC programmable
- Transmitter time-out timer(TOT)
- Busy channel lock-out(BCLO)

Specifications:
- Frequency range:
- [TX] 136 - 174MHz, 400 - 520MHz
- [RX] 136 - 174MHz, 400 - 520MHz, 68-108MHz (FM Broadcast)
- Channel Capacity: 128 Channels
- Channel Spacing: 25KHz (wide band)12.5KHz (narrow band)
- Sensitivity: ≤0.25μV (wide band) ≤0.35μV (narrow band)
- Operation Voltage: 7.4V DC ±20%
- Battery: 2800mAh
- Frequency step: 2.5, 5, 6.25, 10, 12.5, 20, 25, 30 and 50KHz
- Antenna Connector: SMA-Female
- Antenna Impedance: 50Ω
- Accessory Connector: Kenwood 2 Pin Standard
- Stability: ±2.5ppm
- Output power: 5W / 1W
- Audio Power Output: 1000mW/10% (1 Watt)

The kit includes:
- Radio BaoFeng UV-82 (DUAL BAND, DUAL DISPLAY)
- Battery 2800mAh
- Dualband Antenna
- Charger
- Power Adapter
- Headset with microphone, double PTT and clip
- Short lanyard
- Belt clip

Software for the UV-82 radio can be downloaded HERE.
NOTE: In order to program the radio by using the software from above it is necessary to use a dedicated cable.